|
|
Products Detail: Personalized Sculptures™
|
Personalized Sculptures
No set up charge! Fast Service!
Made with 100% UV Polypropylene fabric that will not fade in the sunlight. The same material used in creating our WaterHogs™.
Effectively traps dirt and moisture.
Easy to clean. Vacuum, steamclean, extraction clean or hose off.
Name is permanently molded into the material and will not crush.
Non-Skid rubber backing.
These mats are perfect for closing gifts for real estate agents and home builders, "Thank You" gifts for your best customers, golf tournament participants, High-end hotels and resorts, apartment complexes, incentive programs and much more.
Size Available: 2x3.
|
Personalized Sculptures
Photo's: 1
2
3
Personalized Sculptures
Photo's:
1
2
3
Personalized Sculptures
Photo's:
1
2
3
|
|
Colors
|
Specifications and Cleaning Instructions
|
Retail Pricing
|
General Specifications:
|
Surface |
|
|
Fiber Type: |
BCF Nylon, 4 x 4 twist, 2 ply twist/heatset |
|
Height: |
7/16 in. |
|
Weight: |
26 oz. per square yard (884 grams per square meter) |
|
Construction: |
Cut Pile |
|
Backing |
|
|
Primary Backing: |
Non-woven Polyester |
|
Secondary Backing: |
100%SBR Rubber (20% Recycled content)
Thickness: .060"
Durometer: 60
|
|
|
Features |
|
1. |
25 brilliant colors to choose from. |
|
2. |
TriGrip slip resistant backing helps reduce movement on carpet and hard floor surfaces.
|
|
3. |
Heat set twisted nylon traps dirt and moisture.
|
|
4. |
Outstanding colorfastness.
|
|
5. |
Over 300,000 existing logos to choose from. |
|
6. |
Passes Flammability Standard DOC-FF-1-70 |
|
7. |
Static-Dissipative Nylon fiber
|
|
8. |
Digital printing process produces very fine detail |
CLEANING INSTRUCTIONS
|
1. Vacuum Daily |
| When possible, Waterhog mats should be vacuumed on a daily basis.
During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
|
|
2. Routine Maintenance |
| Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner.
In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly
before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat.
Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer
or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain.
This draining will occur rapidly and the mats will be ready to put back into service in a short time.
|
|
3. Deep Cleaning |
| Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as
low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet
cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be
placed in a position to drain as much as possible before returning to service.
|
|
4. Floor Preparation |
| Prior to the mat being put back into service, Logo Mats recommends that the floor where the mat will be placed be cleaned
to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
|
|
|
|
|